earticle

논문검색

<학술연구>

UCD램프 안정기 핀의 종횡비에 따른 안정기의 방열성능에 관한 연구

원문정보

A Study on the Radiant Heat Performance of Ballast according to the Aspect Ratio of UCD-Lamp Ballast Fin

고동국, 김민수

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

In this study, we analyzed the radiant heat performance of ballast fin when the aspect ratio of the fin of ballast was changed. The minimum size of the mesh was 0.02 mm, and the grid number was about more than 11 thousand. In order to analyze the radiant heat performance of ballast fin, the aspect ratio of fin was 1.00(2 mm:2 mm), 1.80(1.5 mm:2.7 mm), and 0.56(2.7 mm:1.5 mm) respectively; that the heat transfer area was constantly 0.4 mm 2 . The numerical condition was that heat flux was constantly 1×10 5 W/m 2 , and measuring times were 0.1 second, 0.2 second, 0.5 second, 2 seconds, 5 seconds and 10 seconds respectively. The temperature values of fin at the 1.00 and 1.80 of aspect ratios were extremely large when heat flux time was 10 seconds. As a result, the maximum value of radiant heat performance of ballast fin appeared to the aspect ratio of 1.80.

목차

ABSTRACT
 1. 서론
 2. 실험
  2.1 실험장치 구성 및 방법
 3. 수치해석
  3.1 지배방정식
  3.2 해석방법 및 경계조건
  3.3 격자 의존성 평가(Grid dependency test)
  3.4 안정기의 격자구성 및 해석영역
 4. 결과 및 분석
  4.1 열유속 시간변화에 따른 핀의 온도특성
  4.2 핀의 종횡비에 따른 방열성능
 5. 결론
 후기
 References

저자정보

  • 고동국 Dong-Guk Ko. Member, Department of Mechanical Engineering, Chonbuk National University
  • 김민수 Min-Soo Kim. Member, Division of Mechanical Design Engineering, Chonbuk National University

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.