원문정보
초록
영어
To protect the power systems from fault current, the rated protective equipment should be installed. However growth of power system scale and concentration of loads caused the large fault current in power transmission system and distribution system. The capacities of installed protective equipment have been exceeded the due to increase of fault current. This increase is not temporary phenomenon but will be steadily as long as the industry develops. The power system operator need a counter-measurement for safety, so superconducting fault current limiter (SFCL) has been received attention as effective solutions to reduce the fault current. For the above reasons various type SFCLs have been studied recently. In this paper, operation characteristics and power burden of trigger type SFCL is studied. The trigger type SFCL has been used for real system research in many countries. Another trigger type SFCL (double quench trigger type SFCL) is also studied. For this paper, short circuit test is performed.
목차
1. INTRODUCTION
2. PREPARATION FOR SHORT CIRCUIT TEST
2.1. Single / Double quench trigger type superconducting fault current limiter (SFCL)
2.2. Experimental short circuit
3. RESULT AND ANALYSIS
4. CONCLUSION
ACKNOWLEDGMENT
REFERENCES
