earticle

논문검색

철골 산형프레임구조의 효율적인 지붕경사각에 관한 연구 - 제주지역 창고, 공장을 중심으로 -

원문정보

A Study on an Efficient Angle of Roof Slope of the Steel Gable Frame Structures - Concentrated on the Warehouse and Factory in Jeju Island -

고만영

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

This paper presents a study on an efficient angle of roof slope of the steel gable frame structures in Jeju Island. In this paper, the study is limitted to the steel gable frame structures which has hinge support, steel yield strength of SS400 and wind load of Jeju Island. The Steel gable frame structures with varying span length of beam, eaves hight of structures and angle of roof slope were analyzised. An analysis of the steel gable frame structures without wall-braces was carried out by MIDAS Gen/w program. The conclusions obtained from this study on an efficient angle of roof slope of the steel gable structures in Jeju Island are as follows. First, The larger an angle of roof slop is the higher the combined strength ratio, the lower an angle of roof slop is the more economical. This result is come from which the dead and live load of roof are very light. Second, It is found that the longer the span length of beam is the lower an increasing rate of combined strength ratio according to increase angle of roof slope. Third, It is found that the higher an eaves hight of structures is the lower an increasing rate of combined strength ratio according to increase angle of roof slope.

한국어

본 연구는 제주지역의 철골 산형라멘구조에 대해서 보의 경간길이, 건물처마높이 등을 변수로 하였을 때 효율적인 지붕경사각을 제시하고자 하였다. 본 논문에서 연구의 범위는 제주지역에 해당하는 풍하중, 강재는 , 지점은 힌지로 제한하였다. 구조해석은 벽에 가새가 없는 산형철골프레임구조가 연직하중과 횡력을 받는 경우에 대해서 MIDAS Gen/w프로그램을 이용하여 수행하였으며, 그 결과 얻은 결론은 다음과 같다. 첫째, 지붕의 경사각이 클수록 조합응력비는 크게 나타났다. 이러한 결과는 풍하중에 비해 지붕의 고정하중 및 활하중이 매우 작아서 나타나는 결과로 판단된다. 따라서 경제적인 설계를 위해서는 지붕경사각을 작게 하는 것이 효율적인 것으로 나타났다. 둘째, 보의 경간길이와 지붕경사각에 따른 부재의 조합응력비 증가율에 대한 연구결과, 보의 경간길이가 증가함에 따라서 지붕경사각의 증가에 따른 영향은 더 작아지는 것으로 판단된다. 셋째, 건물의 처마높이와 지붕경사각에 따른 부재의 조합응력비 증가율에 대한 연구결과, 건물의 처마높이가 증가함에 따라서 지붕경사각의 증가에 따른 영향은 더 작아지는 것으로 판단된다.

목차

Abstract
 1. 서론
  1.1 연구배경 및 목적
  1.2 연구범위 및 방법
 2. 산형프레임구조물의 해석
  2.1 변수 및 모델링
  2.2 설계하중
 3. 해석방법
  3.1 하중조합
  3.2 사용성 검토
 4. 해석결과
 5. 고찰
  5.1 보의 경간길이와 지붕경사각에 대한 응력분석
  5.2 건물 처마높이와 지붕경사각에 대한 응력분석
 6. 결론
 REFERENCES

저자정보

  • 고만영 Ko, Man-Young. 제주한라대학교 건축디자인과 교수, 공학박사

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.