earticle

논문검색

논문

린6시그마 방법론을 적용한 하드웨어 플랫폼 공용화 설계 방안

원문정보

Common design of hardware platforms using Lean 6 Sigma Methodology

김우식, 박한준, 허형조

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

Recently, Single Board Computer(SBC) is used to meet requirement of weapon systems having high performance. But the Single Board Computer has to be newly developed whenever the system design condition is changed. Thereby, that is one of the factors of increasing development cost because it takes many times and man-power to conduct similar design and verification process. This paper focuses on common hardware which can be applied to various systems with minor modification to reduce developments cost. DMAIC of Lean 6 sigma is applied for common hardware studying. It was verified that the proposed common hardware makes improvements on man-power reduction, decrease of material cost and common test items.

한국어

최근 무기체계 시스템이 고성능화됨에 따라 요구사항을 충족시키기 해 싱보드컴퓨터(SBC: Single Board Computer)를 용하고 있는 추세이다. 하지만 시스템 설계 조건이 변경될 때 마다 싱보드컴퓨터를 신규 개발해 야 하므로 유사한 설계, 검증 업무에 많은 시간과 인력이 소요되어 개발비 상승의 한 요인이 되고 있다. 본 논문에서는 최소한의 수정으로 다양한 시스템에 용할 수 있는 하드웨어 랫폼 공용화 방안을 제안하여 개발비 상승을 최소화하고자 한다. 공용화 연구에는 린6시그마의 DMAIC를 용하으며 제안된 방안이 개발공수 감, 재료비 감, 공통 시험항목 감소 등의 지표항목에서 개선 효과가 있음을 확인하다.

목차

요약
 Abstract
 1. 서론
 2. 린6시그마 방법론 소개
 3. 설계 방안
  3.1 Define 단계
  3.2 Measure 단계
  3.3 Analyze 단계
  3.4 Improve 단계
  3.5 Control 단계
 4. 결론
 참고문헌

저자정보

  • 김우식 Woosik Kim. 한화시스템 판교사업장
  • 박한준 Hanjoon Park. 한화시스템 판교사업장
  • 허형조 Hyoungjo Huh. 한화시스템 판교사업장

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      0개의 논문이 장바구니에 담겼습니다.