원문정보
초록
영어
As 1553B bus system is also widely used in modern avionics system, so in the new bus system development, not only the quality improvement on the performance is needed, but also should be required to be compatible with the original avionics equipment complying with 1553Bbus protocol , maximum reducing avionics system upgrade difficulty. Based on this consideration, the American National Standards Committee has developed the upper mapping of FC protocol—FC-AE-1553 agreement. FC-AE-155 agreement takes full advantages of the fibre channel and also gives full consideration to the requirement of being compatible with the original 1553B equipment, so the system upgrade can be easily realized. Conduct the fibre bus study based on FC-AE-1553, raise the hardware and software design methods and complete the control system demonstration verification based on fibre-optic bus. At the same time, conduct the bridging technology of FC-AE-1553 and MIL-STD-1553B, construct two types of demonstration verification system for bus bridging, breaking the hardware and software technology of FC-AE-1553 and MIL-STD-1553B bridging and establish the hybrid structure of the high and low speed bus, to meet the needs of the actual model, which plays a very important significance for the further development of China’s aerospace business.
목차
1. Introduction
2. Study of Bus Architecture Based on FC-AE-1553
2.1. FC-AE-1553 Communication Protocol Research
2.2. FC-AE-1553 Communication Rahway Research
3. Analysis if Fibre Channel Protocol
3.1. Fibre Channel Protocol Overview
3.2. Fibre Channel Data Unit
3.3. Fibre Channel Service Type
3.4. Fibre Channeled Protocol Hierarchical Structure
4. High and Low Speed Hybrid Bus Architecture Base on FC-AE-1553
5. Protocol Bridge Interface Circuit Design
5.1. FC-AE-1553 Interface Circuit Design
6. Conclusion
6.1. FC-AE-1553 Communication Protocol Reach
6.2. FC-AE-1553 Communication Rahway Research
Reference
