earticle

논문검색

IT마케팅 및 정책

5세대 이동통신 시스템을 위한 도파관-마이크로스트립 앤티포달 변환에 관한 연구

원문정보

A Study on Waveguide to Microstrip Antipodal Transition for 5G cellular systems

기현철

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

In this paper we characterized and designed the waveguide antipodal finline transition at 57-65GHz frequency band in V-band for 5G mobile communication systems. Especially, we proposed the design method of spline taper for finline tapers by means of increasing curvature from linear taper. We could perform optimization more effectively by excluding improper regions for optimal performance from optimization using the method. Return losses and insertion losses of antipodal finline transitions were mainly affected by the taper shape of the finline. The resonances in the structure of the finline transition were the strongest enemies who deteriorate the performance of the transition. And we alleviated the resonances using semicircle shaped patch. The designed antipodal finline transition showed good performance as it showed less than –24.2dB of return loss and –0.24dB of insertion loss in the band(57-65GHz) which we suppose to use.

한국어

본 논문에서는 5세대 이동통신 시스템에 적용하기 위한 V-밴드 내 57-65GHz 대역에서의 앤티포달 핀라인 (antipodal finline) 도파관 변환기의 특성을 분석하고, 변환기를 설계하였다. 특히, 핀라인 테이퍼 형태를 설계하기 위 해 선형 테이퍼에 곡률변수를 통해 곡률을 추가시켜 스플라인(spline) 테이퍼를 구하는 방식을 제안하였다. 이 방식을 통해 최적화에 부적절한 영역을 최적화 영역에서 제외함으로써 보다 효율적으로 최적화를 할 수 있었다. 앤티포달 핀 라인 변환기의 반사손실과 삽입손실은 핀라인 테이퍼 형태에 가장 크게 좌우되었다. 핀라인 변환기 구조에서 발생되는 공진은 변환기의 성능을 저해하는 가장 큰 적이었으며 반원 모양의 패치(patch)를 사용하여 완화시켰다. 설계한 앤티포 달 핀라인 변환기는 사용하고자 하는 대역(57-65GHz)에서 반사손실은 –24.2dB이하이고 삽입손실은 -0.24dB 이하로 서 매우 양호한 특성을 나타냈다.

목차

요약
 Abstract
 Ⅰ. 서론
 Ⅱ. 도파관 변환기의 구조
 Ⅲ. 핀라인 테이퍼 설계 이론
 Ⅳ. 스플라인을 이용한 앤티포달변환기의 설계
 Ⅴ. 결론
 References

저자정보

  • 기현철 Hyeon-Cheol Ki. 정회원, 가천대학교 전자공학과

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.