원문정보
초록
영어
This study is on kinetic light-emitting object control systems and the methodologies for research. The study explores the methodologies for researching and findings on kinetic light-emitting object control systems, which consist of multiple objects comprising multiple groups; the main control section that transmits the main control signals that correspond to each of the groups in order to display forms using multiple objects; multiple sub control sections that transmit sub control signals in correspondence to each of the objects in the corresponding groups from the above in accord with the main control signal; and multiple driving parts that control the length of the wires connected to each of the multiple objects according to the sub control signal.
한국어
본 연구는 키네틱 발광 오브젝트 제어 장치 및 이를 위한 방법에 관한 것으로 BMW Korea의 의뢰를 받아 제작하게 된 작품이다. 연구에서 설명하고 있는 작품은 BMW Korea 드라이빙센터의 설치를 목적으로 하고 있으며 현제 프로토타입 제작이 완료된 상태이다. 본 연구는 다수의 그룹으로 이루어진 다수의 오브젝트와, 그것을 이용하여 형상을 나타내기 위해 다수의 그룹 각각에 대응하는 메인 제어 신호를 전송하는 메인제어부와, 메인 제어신호에 따 라 상기 다수의 그룹 중 대응하는 그룹의 오브젝트 각각에 대응하는 서브 제어 신호를 전송하는 다수의 서브제어부 와, 서브 제어 신호에 따라 다수의 오브젝트 각각과 연결된 와이어의 길이를 조절하는 다수의 구동부를 포함하는 것 을 특징으로 하는 키네틱 발광 오브젝트 제어 장치와 이에 따른 방법에 관한 연구이다.
목차
Abstract
1. 서론
1.1 연구의 배경 및 목적
1.2 연구의 방법 및 범위
2. 기업을 통해 설치된 미디어아트
2.1 폭스바겐의 ‘재미이론’
3. 작품의 하드웨어 구조
3.1 모터 제어를 위한 MCU의 트리구조 제어 방법
3.2 RGB LED 공의 높이 제어를 위한 모터
3.3 무선충전 시스템
4. RGB LED 공의 구조 및 MCU와의 통신방법
4.1 RGB LED 공의 구조
4.2 RGB LED의 색상 제어방법과 MCU와의 통신 방법
5. RGB LED 공을 이용한 3D 모델 제작 방법
5.1 공을 이용한 3D 모델제작
6. 결론
REFERENCES