원문정보
초록
영어
Communication-Based Train Control (CBTC) system is an automated train control system using bidirectional train-ground communications to ensure the safe operation of rail vehicles. The interference from Wi-Fi signals to the CBTC signals has significant impacts on the train control performance. Most of previous works use data from simulation platform. This paper proposes a method to test the Wi-Fi interference to the Communication Based Train Control(CBTC) systems. The test is made mainly based on real subway, and supplemented by laboratory simulation platform. The collected data is to be compared and analyzed. The test result shows that the signal transmission mode of waveguide is the most reliable, followed by the leaky cable. The transmission mode of free wave has the worst anti-interference capability to Wi-Fi signals. This is because that both the waveguide and leaky cable transmission have a better encapsulation compared with the free space transmission. Also applying for specific bands can effectively reduce the interference transferred from Wi-Fi signals to the CBTC.
목차
1. Introduction
2. The Impact of Signal Breaking Off to CBTC Systems
3. The Proposed Testing Methods
3.1. Testing Method for the AP Antenna(Free wave)
3.2. Testing Method for the Leaky Cable
3.3. Testing Method for the Waveguide
4. Testing Results and Analysis
4.1. Testing Results
4.2. Analyze: Anti-interference Performances Contrast
5. Conclusion and Future Work
References
