earticle

논문검색

하수처리장 유입수 자료를 이용한 오수발생 원단위 파악

원문정보

Defining Wastewater unit Discharge Flow and Loading Rates by Influent Characteristic Analysis

이병희, 유호식, 이용운

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

The population and characteristics of wastewater discharged from residential area were studied to estimate discharge and loading rates per capita, since these unit rates were the basic elements to define influent characteristics for new wastewater treatment plants. The influent from two wastewater treatment plants was evaluated. Discharge flow per capita, COD, SS and T-P unit loading rates were higher in influent to 60,000 m3/day capacity wastewater treatment plant than that in 4,000 m3/day capacity wastewater treatment plant. From influent to 60,000 m3/day capacity wastewater treatment plant, average discharge flow per capita, BOD, COD, SS, T-N and T-P unit loading rates were obtained as 310 L/capita⋅day, 75 g/capita⋅day, 36 g/capita⋅day, 73 g/capita⋅day, 20 g/capita⋅day and 2.3 g/capita⋅day, respectively. From influent to 4,000 m3/day capacity wastewater treatment plant, average discharge flow per capita, BOD, COD, SS, T-N and T-P unit loading rates were obtained as 210 L/capita⋅day, 78 g/capita⋅day, 25 g/capita⋅day, 56 g/capita⋅day, 21 g/capita⋅day and 1.5 g/capita⋅day, respectively. Since T-N and T-P unit loading rates from this study show higher values than those in Korean Wastewater Facility Standards, these factors must be considered when new wastewater treatment plant is designed.

한국어

유량 및 부하 원단위는 하수처리장 유입수 설정에 기본이 되는 요소이므로 주택단지로 이루어진 하수처리장 유입수 특성 및 거주 인구를 파악하여 이를 파악하였다. 두 처리장을 대상으로 연구를 수행하였는데, 오수배출량, COD, SS와 T-P는 60,000 m3/일 처리용량의 처리장 유입수로부터 도출된 원단위가 4,000 m3/일 용량 처리장 유입수로부터 도출된 원단위보다 컸다. 60,000 m3/일의 처리용량의 처리장 유입수로 부터는 평균 오수배출량은 310 L/인⋅일 그리고 평균 BOD, COD, SS, T-N 및 T-P 원단위는 각각 75 g/인⋅일, 36 g/인⋅일, 73 g/인⋅일, 20 g/인⋅일과 2.3 g/인⋅일이었고, 4,000 m3/일의 처리용량의 처리장 유입수로 부터는 평균 오수배출량은 210 L/인⋅일 그리고 평균 BOD, COD, SS, T-N 및 T-P 원단위는 각각 78 g/인⋅일, 25 g/인⋅일, 56 g/인⋅일, 21 g/인⋅일과 1.5 g/인⋅일이었다. T-N 및 T-P의 경우 하수도시설기준에서 제시한 값보다 높으므로 처리장 설계 시 이를 고려해야 한다.

목차

Abstract
 요약문
 I. 서론
 II. 연구방법
 III. 결과 및 고찰
  1. 유량 원단위
  2. BOD 원단위
  3. COD 원단위
  4. SS 원단위
  5. T-N 원단위
  6. T-P 원단위
  7. 원단위 결과 종합
 IV. 결론
 사사
 References

저자정보

  • 이병희 Byonghi Lee. 경기대학교 환경에너지공학과
  • 유호식 Ho-Sik Yoo. 경기대학교 환경에너지공학과
  • 이용운 Yong-woon Lee. 전남대학교 환경에너지공학과

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.