원문정보
초록
영어
An in-flight fragment separator, which aims to produce and study rare isotopes, consists of superferric quadrupole triplets and 30° dipole magnets to focus and bend the beams for achromatic focusing and momentum dispersion, respectively. The separator is divided into pre and main stages, and we plan to use superconducting magnets employing high-Tc superconductor (HTS) coils in the pre-separator area, where radiation heating is high. The HTS coils will be cooled by cold He gas in 20- 50 K, and in the other area, superferric magnets using low-temperature superconductor (LTS) will be used at 4 K. A few LTS coils were wound and successfully tested in a LHe dewar, and the design of cryostat has been optimized. Development of the HTS coils is ongoing in collaboration with a group at KERI. An HTS coil of racetrack shape was wound and tested in a LN2 bath and in a dewar with cryocooler. No degradation on critical current due to coil winding was found.
목차
1. INTRODUCTION
2. SUPERFERRIC QUADRUPOLE WITH LTS COIL
2.1. Design optimization
2.2. Coil test
2.3. Quadrupole triplet design
2.4. Magnetic field mapper
3. SUPERFERRIC QUADRUPOLE WITH HTS COIL
ACKNOWLEDGMENT
REFERENCES