earticle

논문검색

종합병원 병동부 평면 형태에 따른 연간 냉난방부하 비교분석

원문정보

An Analysis of Yearly Heating and Cooling Load According to the Plan Type and Orientation in Large Hospital Ward Area

심재헌, 박창배, 윤성환

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

The purpose of this study is to analyze yearly heating and cooling load for the ward area of large hospitals in two metropolitan cities, Seoul at the central region and Busan at the southern region in Korea. Since an initial design stage is considered as an important part of building design in reducing energy consumption, this study develops OpenStudio models to calculate energy load in the initial design stage, while mainly focusing on 37 building orientations in four plan types such as type -, type T, type L, and type Y. Based on the results of the OpenStudio simulation models, this study suggests that the best plan type at each orientation case which decreases energy load for the ward area. On the basis of a southward direction, the study indicates that the yearly heating and cooling loads vary from 100.57% to 101.75% at the central region and from 100.86% to 102.29% at the southern region.

한국어

본 연구의 목적은 중부지방 서울과 남부지방 부산 두 대도시의 종합병원 병동부의 연간 냉난방부하를 분석하는 것이다. 이 연구는 건물의 에너지 소비를 줄이는 디자인과정에서 중요한 부분인 초기설계단계의 해석모델을 OpenStudio에서 형태(-), 형태(T), 형태(L), 형태(Y), 형태(□) 네 가지 모델로 정의하고, 그것을 바탕으로 정동향을 기준으로 5°씩 회전하여 정서향 180°까지 총 37개의 방위각 변수를 이용, 중부지방 서울지역과 남부지방 부산지역의 냉방부하와 난방부하를 분석을 통해 연간 냉난방부하를 비교분석을 통해 정남향 형태(-)을 기준으로 중부지방의 경우 최대 101.75%에서 최소 100.57%의 냉난방부하 차이를 확인하였고 남부지방에서는 최대 102.29%에서 최소 100.68%의 차이가 발생하는 것을 확인하였다.

목차

Abstract
 1. 서론
  1.1 연구의 목적
  1.2 연구의 방법 및 절차
 2. 이론적 고찰
  2.1 병동부 형태
  2.2 병동부 평면 유형
 3. 시뮬레이션 개요
  3.1 시뮬레이션 조건
 4. 에너지 시뮬레이션 결과 분석
  4.1 중부지방 냉난방부하 분석
  4.2 남부지방 냉난방부하 분석
 5. 결론
 참고문헌

저자정보

  • 심재헌 Sim, Je-Hean. 부산대학교 건축학과 건축학 전공 박사과정
  • 박창배 Park, Chang-Bae. 부산대학교 건축학과 부교수
  • 윤성환 Yoon, Seong-Hwan. 부산대학교 건축학과 교수

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.