earticle

논문검색

테라시질라타(Terra Sigillata)의 광택도와 컬러 분장에 관한 연구

원문정보

Study on the Generation of Color and Glossiness of Terra Sigillata

최성재

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

During oxidation and sintering at 1,050℃, terra sigillata is applied instead of glaze to the surface of ceramics so as to enhance the density of clay particles, which, consequently, makes the surface smooth with a soft gloss. This study is intended to actualize a variety of colors by mixing pigments given the texture and features of the terra sigillata based slip and to compare the values of a glossmeter in accordance with temperature changes by means of sodium carbonate (NaCO3) and clear glaze coatings for slips, determining the quality of gloss. Among the ingredients of terra sigillata, solid ball clay and Red Art took up 65%, with ceramic pigments of red (R-1, Japan), blue (B-1, Japan), and yellow (Y-1, Japan) added by 6%, considering saturation. With respect to samples coated with terra sigillata, lether hard and bone dry white porcelains tiles, as well as white porcelains coated with black glaze for the change of the glaze's color in a kiln, were used. They were all coated with terra sigillata before polished. Moreover, this study is designed to observe how sodium carbonate (NaCO3) and clear glaze coatings influenced glossiness. After abovementioned samples were oxidized and sintered at temperatures of 1,060℃ and 1,100℃, respectively, the differences of their glossiness. Moreover, how the sodium carbonate (NaCO3) and clear glaze coatings influenced the changes of glossiness and the color realization was analyzed. All of the samples coated with basic terra sigillata during oxidation and sintering at 1,060℃ and 1,100℃ formed silky surfaces in the process of polishing but failed to create the quality of gloss, looking like a less melted, matte area with a value of 10(GU) or less. As for the samples coated with sodium carbonate (NaCO3), only samples coated with Red Art during oxidation and sintering at 1,060℃ showed a value of 27.1 (GU) as the semi-matte area. As for samples coated with sodium carbonate (NaCO3) during oxidation and sintering at 1,100℃, leather hard and bone dry body samples indicated the value of 3358.8 (GU) as the semimatt area, along with samples coated with clear glaze showing the value of 30.469.7 (GU) as the semi-matte area too. It was found out that the glossiness of the sodium carbonate (NaCO3) and basic clear glaze coatings were steadily proportional to sintering temperatures. For the R series, Red Art sintered at 1,060℃ after the leather hard body was coated with sodium carbonate (NaCO3) and clear glaze showed the highest 󰡒+󰡒 CIEa* value of 23.39. For the Y group, Y-1 sintered at 1,100℃ after bone dry body was coated with those abovementioned showed a high CIEb* value of 30.88. The area coated with black glaze as base resulted in a very low color formation dark yellowish achromatic color with a chroma of 1-5. The chroma and glossiness at 1,100℃ turned out to be the highest, but it was believed that samples oxidized and sintered at 1,100℃ after coated with sodium carbonate (NaCO3) were appropriate to produce ceramic works.

한국어

테라시질라타(Terra Sigillata)는 아주 미세하게 정제된 슬립(Slip)으로 1050℃ 산화소결을 통하여, 도자기 면에 도포하고 연마처리(Polishing) 과정을 통해서 점토 입자의 치밀도를 높여 매끄럽고 부드러운 광택(Gloss)을 나타내며 유약을 대신하여 사용한다. 본 연구는 테라시질라타(Terra Sigillata) 슬립(Slip)의 질감과 특성을 고려하여, 안료의 혼합으로 다양한 색상을 구현하고, 유질을 형성하는 슬립(Slip)을 위해 탄산나트륨(NaCO3)과 기본 투명유약(Clear Glaze) 코팅(Coating)을 하여 온도 변화에 따른 광택도(Glossiness)를 비교하고자 하였다. 테라시질라타(Terra Sigillata)는 도포 시 농도를 고려하여 볼클레이(Ball Clay)와 레드아트(Red Art) 고형분량 65%로 제작하였으며, 세라믹 안료 빨강(R-1, 일본), 파랑(B-1, 일본), 노랑(Y-1, 일본)을 선정하고 포화 농도를 고려하여 6% 첨가하였다. 테라시질라타(Terra Sigillata)를 도포하기 위한 백자시편은 반건조와 건조, 색상의 요변(窯變)을 위한 흑유(Black Glaze) 코팅(Coating) 후 도포하여 연마처리(Polishing) 하였다. 탄산나트륨(NaCO3)과 기본 투명유(Clear Glaze)를 코팅(Coating)하여 광택도(Glossiness)에 미치는 영향을 관찰하고자 하였다. 온도는 1060℃, 1100℃ 산화소결하였고, 광택도(Glossiness)를 측정하여 반건조와 건조 상태와 흑유(Black Glaze) 코팅(Coating) 후의 광택도(Glossiness) 차이를 분석하였고, 탄산나트륨(NaCO3)과 기본 투명유(Clear Glaze)의 코팅(Coating) 후의 광택도(Glossiness) 변화와 색상 구현에 미치는 영향을 분석하였다. 1060℃, 1100℃ 산화소결에서 기본 테라시질라타(Terra Sigillata)를 도포한 시편 모두 연마처리(Polishing) 과정에 의해 매끄러운 표면을 형성하였지만, 유질이 형성 되지 않았고 덜 녹은 듯한 무광택(Matt) 영역으로 광택도(Glossiness) 값은 10(GU) 이하로 나타났다. 탄산나트륨(NaCO3)을 코팅(Coating)한 시편은 1060℃ 산화소결에서 레드아트(Red Art)를 도포한 시편에서만 광택도(Glossiness) 값 27.1(GU)로 반광택(Semi-Matt) 영역으로 나타났다. 1100℃ 산화소결에서 탄산나트륨(NaCO3) 코팅(Coating) 시편은 반건조와 건조 태토시편에서 광택도(Glossiness) 값 33-58.8(GU)로 반광택(Semi-Matt) 영역이 관찰되었고, 기본 투명유(Clear Glaze) 코팅(Coating) 시편은 30.4-69.7(GU)로 반광택(Semi-Matt) 영역을 나타냈다. 탄산나트륨(NaCO3)과 기본 투명유(Clear Glaze)의 코팅(Coating)은 높은 소결온도에 의해 점차적으로 광택도(Glossiness) 값이 증가하는 것으로 판단되었다. R계열은 반건조 태토에 도포하여 1060℃ 소결한 레드아트(Red Art)에서 CIEa*값이 23.39로 ‘+’값으로 가장 많이 진행하였으며, Y계열은 건조 태토에 도포하여 1100℃ 소결한 Y-1에서 CIEb* 30.88로 높은 값을 나타냈다. 베이스를 흑유(Black Glaze) 코팅(Coating)한 영역은 dark yellowish 무채색으로 채도(Chroma)가 1-5로 매우 낮은 발색을 나타냈다. 1100℃에서 색상의 채도(Chroma)와 광택도(Glossiness) 값이 가장 우수하게 나타났지만, 테라시질라타(Terra Sigillata) 슬립(Slip)의 질감과 특성을 고려할 때, 탄산나트륨(NaCO3)을 코팅(Coating)한 1100℃ 산화소결의 시편이 도자 작품에 적용하는 것이 적절하다.

목차

개요
 Abstract
 Ⅰ. 서론
  1. 연구범위 및 목적
 Ⅱ. 본론
  1. 테라시질라타(Terra Sigillata)의 이해
  2. 테라시질라타(Terra Sigillata)의 특성
  3. 테라시질라타(Terra Sigillata) 1060℃, 1100℃ 광택도 분석
  4. 테라시질라타(Terra Sigillata) 1060℃, 1100℃ 색도 분석
 Ⅲ. 결론
 참고문헌

저자정보

  • 최성재 Choi, Sung Jae. 한국전통문화대학교 교수

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

      0개의 논문이 장바구니에 담겼습니다.