원문정보
Evaluation of Structural Performance of RC Beams retrofitted PVA Fiber consequential Replacement Ratio of Recycled Coarse Aggregate and Ground Granulated Blast Furnace Slag
초록
영어
In this study, seven reinforced concrete beams, ground granulated blast furnace slag, replacing recycled coarse aggregate with PVA fiber(BSPG-R series) and standard specimen with PVA fiber(BSP series), and standard specimen(BSS) were constructed and tested under monotonic loading. Experimental programs were carried out to improve and evaluate the structural performance of such test specimens, such as the load- displacement, the failure mode, and the maximum load carrying capacity. All the specimens were modeled in 1/2 scale-down size. Test results showed that test specimens BSP, BSPG were increased the maximum load carrying capacity and the ductility capacity with the standard specimen BSS. This case showed that test specimens BSPG-R Series were similar the maximum load carrying capacity and the ductility capacity until 30% of recycled coarse aggregate replacement ratio with the standard specimen BSS. But, it was reduced by more than 40% of that. In this way, RC beams retrofitted PVA fiber, used the optimal amount of ground granulated blast furnace slag and recycled coarse aggregate, were attained the structural performance in comparison with the standard test specimen.
한국어
연구에서는 순환굵은골재와 고로슬래그 미분말의 치환율에 따른 PVA섬유 보강 철근콘크리트 보의 구조성능 향상 을 위하여 표준실험체 BSS, 표준실험체에 PVA섬유를 보강한 실험체 BSP, 순환굵은골재와 고로슬래그의 치환율에 따른 PVA섬유를 보강한 실험체 BSPG-R시리즈로 총 7개의 실험체를 1/2축소 제작하여 실험을 수행하였다. 실험을 통하여 얻어진 결과를 비교분석하여 하중-변위, 파괴형태, 최대내력 등을 규명함으로써 구조성능의 개선정도를 평가하였다. 실험결과, 실험체 BSP, BSPG는 표준실험체 BSS보다 내력 및 연성능력 등이 향상되었다. 그리고 순환굵은골재의 치환율에 따른 실험을 실시한 결과, 순환굵은 골재 치환율이 30%까지는 표준실험체와 유사하게 나타났으나, 40% 이상 부터는 감소하였다. 이와 같이 철근콘크리트 보에 PVA섬유를 보강하여 적정량의 고로슬래그 미분말 및 순환 굵은골재를 사용할 경우에는 구조성능이 확보되는 것으로 나타났다.
목차
1. 서론
1.1 연구목적
1.2 연구의 방법 및 절차
2. 순환굵은골재와 고로슬래그 미분말의 치환율에따른 PVA섬유 보강 RC보 구조성능 실험
2.1 실험체의 형태 및 변수
2.2 실험체의 제작
2.3 사용재료 특성
2.4 실험방법 및 장치
3. 순환굵은골재와 고로슬래그 미분말의 치환율에따른 PVA섬유 보강 RC보 구조성능 평가
3.1 하중-변위
3.2 파괴형태
3.3 최대내력
3.4 연성능력
4. 결론
참고문헌
