earticle

논문검색

감 수확기구 개발(2) - 고지 전정기 개량 -

원문정보

Development of persimmon harvest apparatus - Improvement of a high-ground trimmer -

우덕감, 김태한

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

Persimmon occupied the second largest cultivation area next to apple among the fruits in Korea. Since 70 % of its cultivating field is located at slope, the efficiency of its harvesting operation is very low. Also, the traditional high-ground trimmer show very low efficiency due to its structure problem.. In this paper, a high-ground trimmer which is a persimmon cultivator was developed by solving the problem of a traditional high ground trimmer. The results of the research are summarized as follows : 1. In case of the developed hydraulic type high ground trimmer, the required average lever tension is 2.9 N. 2. However, the required average tension force of the existing spring type is 25.5 N, which was 8.7 times greater than developed hydraulic lever type trimmer in this study.

한국어

우리나라에서 감은 재배면적으로 볼 때 사과 다음으로 넓은 면적을 차지하고 있다. 그러나 감 재배 포장의 70%가 경사지에 있어서 수확작업의 효율성이 떨어진다. 기존의 감 수확에 이용되는 고지전정기는 구조상의 문제로 인해 사용 시 많은 힘이 소요된다. 본 연구는 이와 같은 문제점의 해결을 위해 기존의 고지 전정기를 개량하여 감탈과시 소요되는 고지전정기의 레버 장력을 기존의 고지전정기와 비교하였다. 그 결과를 요약하면 다음과 같다. 1. 기존의 스프링레버식 고지전정기의 탈과 시 소요되는 레버 장력은 최대 34.4 N, 최소17.7 N, 평균 25.5 N으로 나타났다. 2. 개발한 유압레버식 고지전정기의 탈과 시 소요되는 레버장력은 최대 4.9 N, 최소0.2 N, 평균2.9 N으로 나타났다. 3. 개발한 유압레버식 고지전정기의 평균 장력은 유압레버식이 2.9 N이고 스프링레버식이 25.5 N으로서 스프링레버식이 유압레버식보다 8.7배 큰 것으로 나타났다. 4. 수합장치의 수합율은 개량한 장치가 기존의 것보다 7% 높게 나타났다.

저자정보

  • 우덕감 Woo, D.G.. Department of bio-industrial machinery engineering, Kyungpook National University
  • 김태한 Kim, T.H.. Department of bio-industrial machinery engineering, Kyungpook National University

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

      0개의 논문이 장바구니에 담겼습니다.