earticle

논문검색

콤바인 예취날의 형상이 볏짚절단저항에 미치는 영향

원문정보

An effect of the shape of cutting blade on cutting resistance of rice stalk

최우영, 김태한

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

This study is performed in order to provide the basic information needed for the development of cutting blade for combine. By comparing the developed cutting blade of which were made groove of the surface with the common cutting blade. Friction force and cutting resistance by the cutter bar speed ratio and moisture content of rice stalk were shown as follows: 1. The friction force of the developed cutting blade is shown at the average value as 25% lower than one of the common blade at the average value . 2. The cutting resistance of the developed cutting blade is shown as respectively 12%, 15% and 20% lower than one of the common blade at the moisture content of rice stalk of 14.2%, 55.3% and 84.2%. 3. The cutting resistance of cutting blade by two different driving types is shown that the one by double driving type is , and the one by single driving type is . 4. Optimum cutter bar speed ratio of cutting blade is shown as different according to the moisture content of rice stalk.

한국어

본 연구는 예취시 벼 줄기의 절단 저항이 적은 콤바인 예취날 개발에 필요한 기초 자료를 제공하기위하여 예취날의 윗날 내부에 면적 의 평면 홈을 가공한 개발날과 시중에 판매되는 예취날을 사용하여 절단속도비와 볏짚의 함수율을 인자로 미예취시 예취날의 구동 마찰저항과 예취저항을 측정한 결과는 다음과 같다. 1. 예취날 속도 0.37m/s에서 0.55m/s범위 내에서 단날 구동시의 예취날 구동 마찰저항은 홈 가공을 한 개발 날이 평균 로 홈 가공을 하지 않은 기존 날의 평균 에 비해 25% 낮게 나타났다. 또한 양날 구동방식에서도 홈 가공을 한 개발말이 기존날에 비해 평균 26%정도 구동 마찰저항이 낮게 나타났다. 2. 절단속도비 10.에서 1.5범위 내에서 홈을 가공한 개발날의 볏짚 예취 저항은 기존 날에 비해 볏짚의 함수율 14.2%, 55.3%, 84.2%에 대해 각각 평균 12%, 15%, 20% 낮게 나타났다. 3. 예취날 구동 방식에 따른 볏짚 예취 저항은 양날구동방식이 로 단날 구동방식의 에 비해 평균 17%정도 낮게 나타났다. 4. 예취날의 최적 속도비는 볏짚의 함수율 변화에 따라 다르게 나타났으며 함수율 14.2%, 84.2%에 대해 각각 1.2, 1.4로 나타났다.

저자정보

  • 최우영 Choi, Woo-Young. Department of Bio-industrial Machinery Engineering College of Agriculture and Life sciences, Kyungpook National University
  • 김태한 Kim, Tae-Han. Department of Bio-industrial Machinery Engineering College of Agriculture and Life sciences, Kyun

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

      0개의 논문이 장바구니에 담겼습니다.