earticle

논문검색

급동 급치식 풋콩 탈협기 개발을 위한 기초 연구

원문정보

Development of Vegetable Soybean Thresher with Tooth Type

임학규, 이정택, 김태한

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

Worldwide consumption of vegetable soybean bas been increasing recently, hence it is necessary to produce good quality of soybean in our farms. In the process of vegetable soybean production threshing and seperation work accounts for about 80% of overall labor. Therefore, developing of the vegetable soybean thresher is necessary to reduce the cost of labor. The purpose of this study is to acquire the basic informations to design of the vegetable soybeans-thresher. We make the experimental system which measure the physical properties and investigate the detachment forces. Also, We calculated the minimum speed of threshing cylinder. The result are as follows; 1. The average length of soybean stem is 68.2cm. 2. The length of soybean pods are seen as 61.3mm for 3 grain, 52.6mm fer 2 grains and 41.0mm fer 1 grain 3. The widths of soybean pods are seen as 14.1mm fer 3 grain, 13.8mm fer 2 grains and 13.4mm fer 1 grain. 4. The weights of soybean pods are seen as 4.1grams for 3 grains, 2.7grams for 2 grains and 1.4grams for 1 grain. 5. The average detachment forces of pods are seen as 1.5kgf for 3 grains, 1.2kgf for 2 grains and 0.8kgf for 1 grain respectively For 1 grain, the detachment force of pods ranges from 0.2kgf to 1.4kgf. For 2 grains, the minimum detachment force of pods is seen as 0.6kgf and the maximum one is seen as 2.5kgf. For 3 grains, the minimum detachment force of pods is seen as 0.7kgf and the maximum one is seen as 2.7kgf. 6. The minimum speed of threshing cylinder is shown 6.83m/s.

저자정보

  • 임학규 경북대학교 농업과학기술 연구소
  • 이정택 경북대학교 농업생명과학대학 생물산업기계공학과
  • 김태한 경북대학교 농업생명과학대학 생물산업기계공학과

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

      0개의 논문이 장바구니에 담겼습니다.