원문정보
Analysis of the Temperature-Humidity Changing Characteristics by the Applying Type of the Waterproofing Methods in the Basement Parking Lot in the Winter
초록
영어
To date, deterioration of concrete and corrosion has been issued by the occurred water leakage and condensation, but also has unconcerned by the usual alternative plan. And, that has long been viewed as very nearly impossible to completely protect against the water leakage, and the moisture and low temperature transmission without waterproofing of the outside, because there are many joint parts and micropore area of concrete structure on the underground. The purpose of the research is to procure basics data to be able to find the close dependence of condensation risk and the application methods and materials of waterproofing layer according to the characteristics of temperature-humidity by the location, inner wall or out wall, of waterproofing layer with the concrete wall as the center in the basement related on the environmental conditions of the winter season. As a result of test in this study, the attached waterproofing layer on the out side of a concrete wall will be easy control effectively to the occurrence of condensation than the attached waterproofing layer on the concrete surface in inside of the underground parking lot. Therefore, It is necessary to apply the waterproofing methods on the outside of wall and floor in order to provide fundamental solutions for repairing, and it should be applied to maintenance system, anti-drainage waterproofing system as the back infusion type, to save for the water leakage.
한국어
지금까지 누수 및 결로에 의해 콘크리트 부식과 열화가 발생하는 문제가 이슈화되어 왔지만 그 대안마련에는 무관심한 편이었다. 또한, 지하 콘크리트 구조물에는 매우 많은 조인트와 미세한 공극이 존재하기 때문에 구 조물의 외방수를 실시하지 않음으로써 발생되는 누수문제와 습기 및 온도(냉기)의 전달을 완전하게 막는 것은 거의 불가능하다고 인식되어져 왔다. 이 연구에서는 지하부위 콘크리트 구조물의 방수 적용 형태별(외방수 또는 내방수) 온․습도 변화 특성에 대한 실험을 통해 지하콘크리트 구조물의 결로 발생을 저감할 수 있는 적정한 방수적용 방식 및 재료를 검토하기 위한 기초자료를 확보하고자 한다. 이 연구에서 시험한 결과 외방수가 내방수에 비해 결로 발생을 효과적으로 제어할 수 있는 것으로 나타났다. 따라서 구조물의 성능을 회복하기 위해 벽 및 바닥의 외측에 방수층을 적용 하고, 배면주입 형태의 누수 유지관리 시스템의 적용이 필요하다.
목차
1. 서론
2. 시험체 구성 및 시험방법
2.1 시험체 구성
2.2 시험 방법
3. 시험결과
3.1 적용재료에 대한 기본 성능평가
3.2 시험체 내부 온도 측정결과
3.3 시험체 내부 습도
4. 결론
참고문헌