원문정보
초록
영어
We had proposed a winding method so called “Wind-and-Flip”, which enables a persistent current operation of an HTS pancake coil without any electrical joint. In order to improve the magnetic field drift characteristics, a prototype HTS coil with the technique was fabricated, and tested under various temperatures. Because the coil doesn’t have any electric terminals for current leads, an HTS background magnet was used to induce the persistent current in the coil by field cooling process. A conduction cooling system with a GM cryocooler was prepared to keep the operating temperatures of the prototype coil much below the 77 K. We investigated the magnetic field drift characteristics under the various operating temperatures by measuring the center magnetic field with a cryogenic Hall sensor. The persistent current mode operation at 20 ~ 50K showed a strong possibility of the winding technique for the application such as MRI or NMR.
목차
1. INTRODUCTION
2. EXPERIMENTSAL SETUPS
2.1. Design of the prototype coil
2.2. Fabrication of the coil
2.3. Background magnet
2.4. Cryogenic system
3. TEST RESULTS AND DISCUSSIONS
3.1. Field cooling test
3.2. Long-term test
3.3. Temperature dependency
4. CONCLUSION
ACKNOWLEDGMENT
REFERENCES