원문정보
A Study on the Physical Characteristics of Raku Body
초록
영어
Rakuyakiis a type ofJapanese pottery which has traditionally been used in the tea ceremony.Whendrinkingapowderteainteaceremony,Rakuyakicancontrolthewater contentofthe tea.During the raku process,a low-temperature firing method is used;bisquefireat900℃ andglazefireat1180℃.Forthesereasons,specialmaterialresistanto rapid heatingand cooling processhasto be used formaking raku.Inthisstudy,we analyzed and characterized the raku materialwhich has been used in the Yoshimura Rakunyu (Kyoto,Japan),and tried to develop a new raku materialfrom domestically available sources in Korea. We mixed red clay from Sanchong (40 mesh)(Gyungsangbuk- do,Korea),andalusiteandsilicaattherateof7:1:2.Inagrainsize analysis,53% ofthe mixture passed through a 60-mesh sieve.The shrinkage rate was 3.5% at900℃ and5.5% at1,180℃,andthe absorption rate was13.26% at1,180℃.In addition,the strength value was 0.6081Nm at900℃ and 0.3962Nm at1180℃.These results suggestthatthe novelmixture which we formulated in this study using only domesticKoreanmaterialmaybeusedforraku.
한국어
도자기의 흡수성은 일본다도에서만 볼 수 있는 말차(특히 농차)를 만들 때 차와 수분의 관계를 미묘하게 조절 할 수 있는 기능에 영향을 준다. 이러한 특수한 기능과 소성방식 때문에 수축성과 흡수성 및 급열, 급냉에 강한 특수한 소지를 사용하여야 한다. 본 연구는 현재 일본 교토에서 활동 중인 라쿠 전문 요장인 요시무라 라쿠뉴의 전통 라쿠 소지를 화학적⦁물리적 특성을 분석하여 국내에서 쉽게 구할 수 있는 원료를 사용하여 일본 라쿠소지와 유사한 물성을 가지는 국내 라쿠소지를 개발하고자 내화도가 높은 산청토(40mesh) 70%, 수축율 보완을 위한 홍주석 10%, 규석 20%를 조합하여 급열 급냉에 강한 라쿠소지를 개발하였다. 이 경우 입도분석 결과 60mesh 이상(47%), 60mesh 이하 (53%)였으며, 900℃에서 수축율은 3.5%, 1180℃에서 5.5%로 나타났으며 흡수율은 1180℃에서 13.26%으로 나타났다. 또한, 강도값은 900℃에서 0.3962Nm, 1180℃에서 0.6081Nm의 값으로 국내원료를 사용한 안정적인 라쿠소지를 개발하였다.
목차
Abstract
Ⅰ.서론
Ⅱ. 본론
1.성분분석 및 결정상 분석
2. 물성측정
1) 입도분석
2) 시험편 성형
3) 건조 및 소성
3) 흡수율, 기공율, 겉보기 비중 및 곡강도 측정
3. 소지 조합
Ⅲ. 결과 및 고찰
1. 일본 라쿠소지 분석
2. 라쿠소지 개발
Ⅳ.결론
참고문헌