원문정보
초록
영어
This paper presents the application of the Modified Particle Swarm Optimization (MPSO) technique for optimal settings zones for distance relay protect 400 kV single transmission line of Eastern Algerian transmission networks at Algerian Company of Electrical and Gas (Group Sonelgaz) compensated by Thyristor Controlled Series Capacitor (TCSC) connected at midpoint for minimized active and reactive power loss. The effects of TCSC insertion on the total impedance of a protected transmission line with respect to injected variable reactance value (XTCSC) in capacitive and inductive boost mode depending of the firing angle (α) is considered. The modified setting zone protection for three zones (Z1, Z2 and Z3) is have been investigate in order to prevent circuit breaker nuisance tripping and improve the performances of distance relay protection. In this work our aim is to compare the performance of the proposed MPSO algorithm with an analytical method (AM). The findings demonstrate the outstanding performance of the proposed MPSO in terms of computation speed, rate of convergence, and feasibility. The simulation results are compared with each other, and then the more perfect algorithm is considered.
목차
1. Introduction
2. Principal of TCSC Compensator
3. Distance Protection: Principal and Setting Zones
4. Particle Swarm Optimization (PSO) Technique
4.1. Original Particle Swarm Optimization Algorithm
4.1. Modified Particle Swarm Optimization Algorithm
5. Case Study and Simulation Results
5.1. Settings zones without TCSC
5.2. Settings Zones based Analytical Method
5.3. Settings Zones based MPSO Technique
5.4. Comparison and Interpretations
6. Conclusion
References
Appendix