원문정보
피인용수 : 0건 (자료제공 : 네이버학술정보)
초록
영어
In this paper, a Al/ZnO/a-Si/polymer solar cell is fabricated by using the sputtering technique. The current–voltage characteristic curve indicates that the cell efficiency increased from 0.05453% to 0.484% for ZnO/Si/poly(3-hexylthiophene) as the Si film thickness increased. When the cell was fabricated using ZnO/Si/polyvinyl chloride and ZnO/Si/paraphenylene vinylene, the efficiencies increased from 0.505% to 2.793% and from 1.6% to 2.934%, respectively, as the Si film thickness increased.
목차
Abstract
1. Introduction
2. Parameters of the Solar Cell
2.1. Solar Cell
2.2. Heterojunction Solar Cells
3. Experimental Work
4. Results and Discussion
4.1. I –V Characteristics
4.2. Energy Band Diagram for Si/Polymers HJs
5. Conclusion
Acknowledgments
References
1. Introduction
2. Parameters of the Solar Cell
2.1. Solar Cell
2.2. Heterojunction Solar Cells
3. Experimental Work
4. Results and Discussion
4.1. I –V Characteristics
4.2. Energy Band Diagram for Si/Polymers HJs
5. Conclusion
Acknowledgments
References
저자정보
참고문헌
자료제공 : 네이버학술정보