earticle

논문검색

〈학술연구〉

STD11의 선삭 시 절삭력 예측 및 요인별 상관계수 도출

원문정보

Correlation Coefficients by Factors and Prediction of Cutting Forces When Turning to STD11

이이선, 배명일

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

In this study, we were turning STD11 and was carried out to presume for mutual relation of turning condition to get optimum cutting force(principal, radial, feed force) and experimental equation by variance, correlation coefficient and multi regression analysis with whisker reinforced ceramic tool. To predict cutting force, analyze principal, radial, feed force with multi-regression analysis. Results are follows: From the analysis of variance, affected factor to cutting force feed rate, depth of cut, cutting speed in order and cutting speed was very small affect to cutting force. From multi-regression analysis, we extracted regression equation and the coefficient of determination(R2) was 0.84, 0.88, 0.7 at principal, radial and tangential force. It means regression equation is significant. From the experimental verification, it was confirmed that princial, radial and tangential force was predictable by regression equation. Through the analysis of the correlation coefficient between each component forces and surface roughness, the principal force was found to have the greatest impact

목차

Abstract
 1. 서론
 2. 실험장치 및 방법
  2.1 실험장치
  2.2 실험방법
 3. 실험 결과 및 고찰
  3.1 주분력(Principal force)
  3.2 배분력(Radial force)
  3.3 이송분력(Feed force)
  3.4 변수 간 상관계수 비교를 통한 주 효과 분석
  3.5 회귀방정식의 검증
 4. 결론
 참고문헌

저자정보

  • 이이선 Rhie, Yi-Seon. BM WORKS 기술연구소
  • 배명일 Myung-Il Bae. 충남대학교 기계금속교육과

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.