earticle

논문검색

소각용융슬래그의 특성 및 수처리 여과재 활용에 관한 연구

원문정보

The Charateristics of Melting Slag from MSWI and Sewage Water Filter Application

박상구, 김건흥

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

The objective of the study is to find a way to utilize MSWI slag as filter material and to verify it. To do so, stability as filter material was tested, and used Ju-Munjin filter sand as control group to run actual filtering experiment to analyze filtering efficiency. According to result, MSWI slag is usable within designated waste acceptable standards. Also, it showed similar level of filtering capability to filter sand. Thus, MSWI slag could help to save and recycle resources if used as filtering material instead of filter sand As result of filtering test, SS and COD showed about same level of filtering capability similar to standard filter sand. MSWI slag has shown 26.96% higher with T-N, and 6.55% higher with T-P compared to standard filter sand. Also, remove efficiency comparison result with No. 40#(0.43mm) and mixed diameter showed equal or greater filtering capability

한국어

본 연구의 목적은 폐기물에서 발생되는 소각재 용융슬래그의 여과재 활용가능성을 검증하는데 있다. 이를 위하여 소각재 용융슬래그의 여과재 기능을 수행할 수 있는지 안전성 검토를 수행하고, 일반적인 여과재로 사용 되는 주문진 표준사를 대조군으로 하여 실제 여과실험을 수행함으로서 그 여과능을 분석하였다. 연구결과에 따르 면 용융슬래그 여과재는 중금속 용출율이 지정폐기물 허용기준 내로 사용이 가능한 수준이며, 여과 실험 결과 SS와 COD의 경우 표준여과사와 유사한 수준의 여과능을 나타내었으며, T-N, T-P의 경우는 표준여과사 보다 소각용융슬래그가 T-N은 26.96%, T-P는 6.55% 더 높은 처리율을 보였다. 또한, 소각용융슬래그의 입경에 따 른 제거율 비교를 수행한 결과 No.40#(0.43mm)와 혼입경의 경우 표준여과사와 동등 또는 그 이상의 여과능을 보였다. 따라서, 용융슬래그를 여과사로 활용할 경우 주문진 표준사에 비하여 자원절약과 자원재활용의 효과를 가져 올 수 있을 것으로 판단된다.

목차

요지
 Abstract
 1. 서론
 2. 실험재료 및 연구방법
  2.1 실험재료
  2.2 연구방법
 3. 결과 및 고찰
  3.1 소각용융슬래그의 특성
  3.2 소각용융슬래그의 수처리 활용
 4. 결론
 참고문헌

저자정보

  • 박상구 Park, Sang-Goo. 정회원ㆍ인하대학교 사회기반시스템공학부 토목공학과 박사과정
  • 김건흥 Kim, Gun-Heung. 비회원ㆍ인하대학교 사회기반시스템공학부 토목공학과 정교수

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.