earticle

논문검색

크실리톨과 상전이 물질의 흡열반응을 활용한 수화열저감에 관한 실험적 연구

원문정보

A Hydration Heat Property of Mortar Using Endothermic Reaction of Xylitol and Phase Change Materials(PCM)

박태균, 임남기

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

The purpose of this study is to investigate a hydration heat property of mortar using endothermic reaction of xylitol and phase change materials(PCM). For this reason, this study is to control the hydration heat by replacing mineral admixture or adding xylitol and Sodium sulfate dodecahydrate, calcium nitrate tetrahydrate, sodium phosphate dibasic dodecahydrate as PCM. Mortar to produce 0.2% or 0.3% of the amount of xylitol, sodium sulfate dodecahydrate, calcium nitrate tetrahydrate, sodium phosphate dibasic dodecahydrate, respectively, 2% of the full amount of cement were made. Also, plain mortar and mortar containing blast-furnace slag (30%) were made, in order to compare with mortar using PCM and xylitol. A gillmore needle, measurement of hydration heat, compressive strength and tensile strength were tested. From the test results, a initial setting of mortar containing 0.2% xylitol and 2% sodium phosphate dibasic dodecahydrate was found to become fast. And a initial setting of mortar containing 0.3% xylitol was found to become slow. Also, mortar containing xylitol and PCM can reduce of maximum temperature and increase compressive and tensile strength compared to the plain mortar and mortar containing blast-furnace slag.

한국어

본 연구의 목적은 크실리톨과 상전이 물질의 흡열반응을 활용하여 수화열 저감에 관한 영향을 알아보고자 하는 연구이다. 실험을 실시하기 위하여 크실리톨 0.2 와 0.3%를 혼입하였으며, PCM재료는 황산나트륨, 질산칼슘, 인산 나트륨을 2%를 혼입하여 모르타르를 제작하였다. 그리고 비교 시험체로 기준모르타르와 고로슬래그 미분말을 30%혼입한 저발열 배합을 제작하였다. 평가항목은 수화열측정, 길모아침, 압축강도 및 휨강도를 측정하였다. 그 결과, 황산을 혼입한 시편의 초결이 가장 빨랐으며, 크실리톨 0.3%를 혼입한 시편의 초결이 가장 늦게 나타났다. 또한 PCM재료와 크실리톨을 사용한 시편들이 OPC와 저발열 배합에 비하여 수화열이 저감하였으며, 최고온도 도달시간도 늦게 나타났다. 압축강도와 휨강도 역시 PCM재료와 크실리톨을 사용한 시편들이 OPC와 저발열 배합에 비하여 높은 압축강도 발현을 보였다.

목차

Abstract
 1. 서론
  1.1 연구배경 및 목적
 2. 이론적 고찰
  2.1 초지연제의 개요
  2.2 PCM
  2.3 크실리톨
 3. 실험개요 및 실험방법
  3.1 실험재료
  3.2 시편계획
  3.3 실험방법
 4. 실험결과
  4.1 응결시간 측정 결과
  4.2 수화열 측정 결과
  4.3 역학적 특성 결과
 5. 결론
 참고문헌

저자정보

  • 박태균 Park, Tae-gyun. 동명대학교 건축공학과, 박사수료
  • 임남기 Lim, Nam-Gi. 동명대학교 건축공학과, 정교수, 공학박사

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.