earticle

논문검색

아라미드섬유와 유리섬유로 혼합된 하이브리드 FRP 플레이트로 보강된 RC 보의 휨 보강 성능

원문정보

Flexural Strengthening Performance of Reinforced Concrete Beam Strengthened with Hybrid FRP plate mixed Aramid sheet and Glass sheet

하상수

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

The objective of this study is to understand the flexural strengthening effects of RC beam reinforced hybrid FRP(Fiber Reinforced Polymer) plate. The hybrid FRP plate used this study was the strengthening material with mixing Aramid fiber sheet and Glass fiber sheet in the rate of one to nine, and the amount of resin included the FRP plate is about 30%. Carbon FRP plate or hybrid FRP plate included Carbon fiber sheet is limited to strengthening the structures using electricity such as established subway structures or Korea Electric Power Corporation. However, the range of field application of the hybrid FRP plate mixed Aramid fiber sheet and Glass fiber sheet was not limited because they are non-conductor, In addition, the hybrid FRP plate mixed Aramid and Glass fiber is superior to existing FRP plate in respects of the economics and structural performance. The beams of seven specimens were planned to comprehend the flexural strengthening effects for flexural beams reinforced hybrid FRP plate. Test variables are the types of FRP plate, the form of anchor, and resin. As the results of this study, All specimens reinforced by the FRP plate have a good structural behavior compared with the standard specimen which did not strengthening especially, the specimens with the hybrid FRP plate mixed Glass and Aramid fiber sheet have the higher structural performance than those of existing FRP plate.

한국어

본 연구의 목적은 하이브리드 FRP(Fiber Reinforced Polymer) 플레이트로 보강된 철근 콘크리트 보의 휨 보강 효과를 파악하기 위한 것이다. 본 연구에 사용된 하이브리드 FRP 플레이트는 아라미드섬유와 유리섬유를 1:9로 혼합하고, 섬유와 에폭시를 7:3으로 혼합하여 제작한 보강재이다. 탄소 FRP 플레이트 또는 탄소섬유가 포함되어 있는 하이브리드 FRP 플레이트는 기존의 기하철 구조물이나 한국전기공사와 같이 전기를 사용하는 구조물을 보강하는데 한계가 있다. 그러나, 아라미드섬유와 유리섬유를 혼합한 하이브리드 FRP 플레이트는 비전도성이기 때문에 전기를 사용하는 구조물을 보강하는데 제한이 없다. 또한, 아라미드섬유와 유리섬유를 혼합하여 제작한 하이브리드 FRP 플레이트는 경제성 및 구조성능 측면에서 기존에 사용되어 온 FRP 플레이트보다 우수하다. 하이브리드 FRP 플레이트로 보강된 휨 부재의 휨 성능효과를 파악하기 위하여 7개의 제작하였다. FRP 플레이트 종류, 앵커형태, 그리고 에폭시 유무 등을 주요 실험변수로 하였다. 실험결과, FRP 플레이트로 보강한 모든 실험체가 보강하지 않은 실험체보다 우수한 구조성능을 나타내었고, 기존에 사용되어 온 FRP 플레이트로 보강한 실험체에 비해 아라미드섬유와 유리섬유를 혼합한 하이브리드 FRP 플레이트로 보강한 실험체가 우수한 휨성능을 나타내었다.

목차

Abstract
 1. 서론
  1.1 연구배경 및 목적
  1.2 기존연구
 2. 하이브리드 FRP 플레이트
  2.1 형상 및 혼합비율
  2.2 하이브리드 FRP 플레이트 재료물성
 3. 실험
  3.1 실험체 계획
  3.2 보강방법
  3.3 휨 보강 실험체 설치
 4. 실험결과
  4.1 균열상황 및 최종파괴상황
  4.2 하중 변위 곡선 비교
  4.3 내력식 검토
 5. 결론
 참고문헌

저자정보

  • 하상수 Ha, Sang Su. 강남대학교 건축공학과 조교수, 공학박사

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.