earticle

논문검색

밀리미터파 복사계의 제작

원문정보

Fabrication of Millimeter Wave Radiometer

김순구

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

We have manufactured a close range Dicke type radiometer which consists of two stage low noise amplifier and diode detector. Frequency range of this system is 35 GHz. And this is used for studying temperature calibration on specific objects. We have present millimeter-wave radiometer's thermal calibration method and its characteristics. From absolute temperature 299K to 309K, in proportion to increase temperature, output voltages are linearly increased. In this case, undefined objects can be measured thermal noise temperature relatively. Overall from absolute temperature 214K to 309K, we have obtained relation of temperature and output voltage;V= 0.03601K - 10.70517.

한국어

물체에서 방사되는 열잡음 신호를 수신하여 증폭하고 검파회로를 거쳐 DC전압으로 출력하는 35GHz 대역의 근거리 디케형(Dicke type) 복사계를 제작하고, 복사계의 온도 보정과 그 특성을 소개한다. 또한 이를 이용하여 특정 물체의 밀리미터파 방사에너지를 측정하기 위한 온도보정에 관한 연구를 수행 하였다. 온도범위 299K ~ 309K 에서 온도 증가에 따른 밀리미터파 복사계의 출력전압은 선형적이었으며, 이 범위의 온도에서 미지의 흑체 복사에너지의 상대적인 양을 밀리미터파 복사계를 이용하여 측정이 가능하다. 실험한 온도 범위에서 온도와 출력전압과의 관계는 V= 0.03601K - 10.70517 을 얻었다.

목차

요약
 Abstract
 I. 서론
 II. 복사계의 제작 및 온도 측정
 III. 결과 및 논의
 IV. 결론
 참고문헌

저자정보

  • 김순구 Soon-Koo Kim. 정회원, 상지대학교 이공대화 응용물리전자학과

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 원문제공기관과의 협약기간이 종료되어 열람이 제한될 수 있습니다.

      0개의 논문이 장바구니에 담겼습니다.