earticle

논문검색

생산기술

Inconel 600 및 STS 310 재료를 이용한 브레이징 접합에 관한 연구

원문정보

A Study on the Brazing using Inconel 600 and STS 310 Materials

심규택, 조만순, 주기남

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

A capsule is the device for irradiation test of nuclear materials and fuels in HANARO. The instrumentation cables are sealed tightly by brazing at the top of the capsule. In this study, the integrities at the brazing of both Inconel 600 and STS 310 materials were confirmed by tensile test, survey of damage on coating, and measurement of insulation resistance. At tensile test, brazing areas were not damaged but the thermocouples themselves were broken on both the materials. At flame heat test, the coating of STS 310 material was maintained without damage but the brittle fracture on Inconel 600 material was observed. Insulation resistances were confirmed to be satisfactory in case of both the materials. In this analysis, the thermocouple was expanded by 0.81mm on the direction of y-axis and the tube was contracted by 0.57mm on the direction of x-axis. As the result, cracks might be occurred with thermal stresses. EDX spectrum analysis showed that the BAg-1 filler metal formed a thin reaction layer on the surface of brazed metal.

목차

Abstract
 1. 서론
 2. 실험방법
  2.1 사용재료
  2.2 브레이징 방법
 3. 실험 결과
  3.1 기계적 특성
  3.2 열전대 피복 특성
  3.3 절연저항 특성
  3.4 재료 응력특성 해석
  3.5 브레이징 접합면의 특성
 4. 결론
 참고문헌

저자정보

  • 심규택 K. T. Shim. 한국원자력연구원 하나로운영부
  • 조만순 M. S. Cho. 한국원자력연구원 하나로운영부
  • 주기남 K. N. Choo. 한국원자력연구원 하나로운영부

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.