원문정보
An Experimental Study on Harmlessness of Asbestos-Containing Waste Materials by High Temperature Smelting Method
초록
영어
This paper intends to study on harmlessness of asbestos-containing waste materials by high temperature smelting method. Asbestos is a mineral fiber that has been used commonly in a variety of building construction materials. Asbestos has been used for a wide range of manufactured goods, because of its fiber strength and heat resistant properties. Nevertheless harmful of asbestos is very serious. Exposure to airborne friable asbestos may result in a potential health risk because persons breathing the air may breathe in asbestos fibers. To dispose of asbestos by high temperature smelting method is required very high smelting temperature more than 1,500℃. In this paper, we fulfilled about properties of asbestos cement slates and asbestos cement plate, smelting characteristics using mixture clean energy on the different temperatures, analysis of slag(SEM, XRD and PLM) etc. The result of analysis, it is harm to dispose of asbestos below temperature smelting of 1,300℃. Although it is harmless to dispose of asbestos by temperature smelting of 1,500℃, some are potentially poisonous. It is harmless to dispose of asbestos by temperature smelting of 1,700℃. The results of this study will be suggested as a preliminary data.
한국어
본 논문은 고온용융을 통하여 석면의 폐기물을 무해화시키기 위한 기초적 자료를 제시하는 연구이다. 석면은 건설재료로서 다양하게 사용되고 있는 광물적 섬유이다. 석면은 섬유의 강도 및 내열성에 의하여 광범위 하게 사용된다. 그럼에도 불구하고 석면의 유해성은 심각하다. 공기에의해 석면에 노출될때 심각한 질명을 야기시킬수 있다. 이러한 석면을 처리하기 위한 방법으로는 고온 용융을 통하여 무해화 시키는 방법이있다. 이에 본 연구에서는 석면을 1500℃ 이상에서 지속적으로 용융하여야 무해화되는 폐석면의 기존 처리방식을 개선하기 위하여 혼합청정에너지를 사용한 단시간 동안의 용융 온도별 폐석면의 성상을 비교 분석하고 이를 바탕으로 석면의 무해화가 가능한 최적의 용융온도 연구에 대한 기초적 자료를 제시하고자 한다.
목차
1. 서론
1.1 연구배경 및 목적
1.2 연구범위 및 방법
2. 실험계획
2.1 실험재료
2.2 시편계획
2.3 실험방법
3. 실험결과 및 고찰
3.1 개요
3.2 XRD 중량분석에 의한 석면의 용융온도별 성분 분석결과
3.3 PLM에 의한 석면의 용융온도별 성분 분석결과
3.4 SEM에 의한 석면의 용융온도별 상분석 결과
4. 결론
참고문헌