원문정보
A Study on the CAD/CAM's trend and the examples of it's application in Korea
초록
영어
This study has been made to evaluate technological level and to identify research issues in CAD/CAM area. It is found out that major users of the CAD/CAM system are in mechanical and electronics as well as garment industries. Their experience shows that the impact of the CAD/CAM introduction is not yet noticeable in drafting man power and cost reduction. It is identified that the low penetration rate of CAD/CAM technology in industry is due to the lack of locally developed CAD/CAM softwares. Specially, Computer Aided design and Manufacture(CAD/CAM) represents a merging of technological advances in computer hardware and software with pressing needs in manufacturing industries. CIM, PDM and ERP systems from Computer graphics-Aided Design through engineering analysis, fabrication and Production management are now beginning in minor enterprises such as Die & Mould company. With developing CAD/CAM system, Software tools to improve the pro- ductivity of CAD programmer have had a significant impact an cost effective -ness of providing computer aided design tools at mechanical fields. therefore, the CAD system in use of our Die & Mould and other areas is a large, integrated, and mature systems. It was designed to improve the productivity of not only the user but also that implements and maintain the system.
한국어
컴퓨터의 이용한 설계의 자동화(CAD)에서 생산 제작(CAM)의 자동화까지 발전하여 설계와 제작을 통합한 CIM에서 생산 전반의 공정 자동화를 추구하는 PDM으로 발전하였다. 이용된 컴퓨터는 워크스테이션 4~8개를 1 unit로 네트워크에 연결한 호스트 컴퓨터를 주로 사용하고 있다. CAD/CAM의 도입이 필요한 금형 업계의 그 활용도는 소규모 기업이 45%, 40인 이상의 기업이 겨우 70%정도이다. 그러나 CAD와 CAM이 서로 연결하여 활용하는 곳은 적은 편이며, 사용되는 소프트웨어는 AutoCAD, CAD맥스, 기타 워크스테이션 용 소프트웨어의 순이다. 이 밖에 가공, 보석, 의류 디자인에 이용되고 있으나 선진국과 같이 PDM이나 ERP로 발전하여 영업, 설계, 물류 등을 결합한 완전한 CAD/CAM시스템의 구현이 절실한 실정이다.
목차
Ⅰ. 서론
1. CAD/CAM의 자동화
2. 하드 웨어(Hardware)의 구성
3. CAD/CAM 소프트웨어
Ⅱ. 기계 분야의 CAM
1. 자동화된 공구경로 생성
2. 고속 가공
3. 다양한 가공기능
Ⅲ. 금형 업계의 CAD/CAM 활용도
1. 도입 현황
2. CAD/CAM 활용 업체
3. CAD/CAM의 전반적인 만족도
Ⅳ. 최근 CAD/CAM/CAE의 발전 방향
Ⅴ. 각 분야에서 CAD/CAM의 적용 예
Ⅲ. 결론
참고문헌
Abstract