earticle

논문검색

울산지역 산업폐수슬러지의 에너지자원화를 위한 특성 조사

원문정보

Characterization of Wastewater Sludges Collected from Ulsan Industrial Complexes for Energy Recovery

김형우, 김경호, 김지원, 박흥석

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

The characterization of organic sludges collected from wastewater treatment facilities of various companies located in Ulsan national industrial complexes was done for their moisture content, volatile solid content, fixed solid content, elemental composition, heating value, heavy metal concentration, and methane yield. The range(%) of moisture content, volatile solid content and fixed solid content were 53.0~84.3, 14.1~33.2, and 1.7~20.2, respectively. The higher heating value (kcal/kg, HHV, dry basis) of sludges from petrochemical industry, automobile industry, food and beverage industry, chemical industry, pulp and paper industry were 2544~4561, 3602l, 2868~4250, 1292~4593, and 1304~1444, respectively. All the sludges except that from chemical industry, contained heavy metals lower than the standard for ocean dumping. The methane yield (ml CH4/gVS) of the sludges from pulp and paper, food and beverage, chemical, petrochemical, and automobile industries were 121~152, 92~175, 16~179, 31~139, and 85.0, respectively. As potential energy recovery methods, incineration and anaerobic digestion of wastewater sludges may be considered, in which case the characterization results indicated that the sludges have a large variation in their energy production potential (as revealed from their heating value and methane yield). Thus, based on their characteristics, systematic management of sludges by appropriate technology is required for efficient energy recovery.

한국어

본 연구는 울산광역시의 국가산업단지에서 발생하는 폐수슬러지의 에너지 자원화를 위한 기초자료로 활용하기 위해 특성을 조사하였으며, 19개 기업에서 채취된 폐수슬러지를 대상으로 삼성분, 원소조성, 열량, 중금속 농도, 메탄발생량을 분석하였다. 삼성분(%)은 수분함량, 가연분, 회분이 각각 53.0~84.3, 14.1~33.2, 1.7~20.2로 나타났으며, 건조고위발열량(kcal/kg)은 석유화학제조업, 자동차제조업, 식음료제조업, 화학제품제조업, 펄프제지제조업이 각각 2544~4561, 3602, 2868~4250, 1292~4593, 1304~1444으로 나타났다. 중금속분석결과는 화학제품제조업에서 채취한 하나의 시료를 제외하고는 폐기물의 해양배출 및 지정폐기물 판정 기준 농도 이하로 나타났으며, 메탄발생량(ml CH4/g VS)은 펄프제지제조업, 식음료제조업, 화학제품제조업, 석유화학제품제조업, 자동차제조업이 각각 121~152, 92~175, 16~179, 31~139, 85으로 나타났다. 폐수처리슬러지의 에너지 자원화방안으로 소각과 혐기성 분해를 고려할 수 있으며, 슬러지 특성 분석결과, 사업장에서 발생하는 폐수슬러지는 열량, 메탄생성량 등 에너지 잠재량의 변동이 크므로, 에너지 자원화를 위해서는 이들 방법에 적합하게 특성의 체계적인 관리가 필요한 것으로 나타났다.

목차

Abstract
 요약문
 I. 서론
 II. 연구방법
  1. 대상 시료
  2. 분석방법
 III. 결과 및 고찰
  1. 삼성분 분석
  2. 원소분석
  3. 열량 측정
  4. 중금속 분석
  5. 메탄발생량과 영향요인 분석
  6. 고찰
 IV. 결론
 References

저자정보

  • 김형우 Hyeong-Woo Kim. 울산대학교 건설환경공학부
  • 김경호 Kyeong-Ho Kim. 울산대학교 건설환경공학부
  • 김지원 Ji-Won Kim. 부산EIP사업단
  • 박흥석 Hung-Suck Park. 울산대학교 건설환경공학부

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.