earticle

논문검색

무선 센서 네트워크에서 수신신호세기와 전력손실지수 추정을 활용하는 비콘 노드 기반의 위치 추정 기법

원문정보

Beacon Node Based Localization Algorithm Using Received Signal Strength(RSS) and Path Loss Calibration for Wireless Sensor Networks

강형서, 구인수

피인용수 : 0(자료제공 : 네이버학술정보)

초록

영어

In the range-based localization, the localization accuracy will be high dependent on the accuracy of distance measurement between two nodes. The received signal strength(RSS) is one of the simplest methods of distance measurement, and can be easily implemented in a ranging-based method. However, a RSS-based localization scheme has few problems. One problem is that the signal in the communication channel is affected by many factors such as fading, shadowing, obstacle, and etc, which makes the error of distance measurement occur and the localization accuracy of sensor node be low. The other problem is that the sensor node estimates its location for itself in most cases of the RSS-based localization schemes, which makes the sensor network life time be reduced due to the battery limit of sensor nodes. Since beacon nodes usually have more resources than sensor nodes in terms of computation ability and battery, the beacon node based localization scheme can expand the life time of the sensor network. In this paper, therefore we propose a beacon node based localization algorithm using received signal strength(RSS) and path loss calibration in order to overcome the aforementioned problems. Through simulations, we prove the efficiency of the proposed scheme.

한국어

무선 센서 네트워크(WSN)에서 센서 노드의 위치 추정 기술 중 거리 기반의 위치 추정 기술은 거리 측정에 따라 센서 노드의 위치 추정의 정확성이 달라진다. 거리 기반의 위치 추정 기술에서 거리를 측정하는 많은 기술 중에 추가적인 장비 없이 쉽게 구현이 가능한 기술 중 하나는 수신 신호 세기이다. 그러나 수신신호세기 기반의 위치 추정 기법은 몇 가지 문제점을 고려해야 한다. 하나는 수신된 신호는 채널 환경에서 페이딩, 쉐도잉 그리고 장애물 등으로 인해서 거리 추정의 오차가 생긴다. 이로 인해서 센서 노드의 위치 추정의 정확성은 낮게 된다. 또 다른 하나는 거리 기반의 위치 추정 기술은 대부분 센서 노드에 의해서 자신의 위치를 추정한다는 것이다. 하지만 센서 노드의 한정된 배터리 용량 때문에 무선 센서 네트워크의 동작 시간이 감소하게 된다. 반면에 비콘 노드는 센서 노드보다 처리 능력과 배터리 용량이 더 높기 때문에 비콘 노드 기반 위치 추정 기법은 무선 센서 네트워크의 동작 시간을 연장 할 수 있다. 본 논문에서는 비콘 노드에서 수신 신호 세기와 전력손실지수 추정을 활용하여 센서 노드의 위치를 추정하는 알고리즘을 제안함으로써 위의 문제점을 극복한다. 시뮬레이션을 통해서 제안한 기법을 검증한다.

목차

요약
 Abstract
 I. 서론
 II. 시스템 모델
  1. 시스템 구성
  2. 전파 모델
 III. 제안된 비콘 노드 기반의 위치 추정 알고리즘
  1. 비콘 노드들 간의 전력 손실 지수 추정
  2. 센서 노드의 임시 위치 측정
  3. 각 비콘 노드와 센서 노드간의 전력 손실 지수 추정
  4. 각 비콘 노드에서 센서 노드의 위치 추정
 IV. 시뮬레이션 결과
 V. 결론
 참고문헌

저자정보

  • 강형서 Hyung-Seo Kang. 준회원, 울산대학교, 전기전자정보시스템공학부
  • 구인수 In-Soo Koo. 정회원, 울산대학교, 전기전자정보시스템공학부

참고문헌

자료제공 : 네이버학술정보

    함께 이용한 논문

      ※ 기관로그인 시 무료 이용이 가능합니다.

      • 4,000원

      0개의 논문이 장바구니에 담겼습니다.