원문정보
초록
영어
Rubber rollers in off-set printing process are one of the most important factor, transferring the ink and water to the plate. Each different roughness of roller surface and different rubber compounds could effect to ink transparency and printability. Three different rubber compounds (NBR, EPDM, PU) and each different roughness of roller surface would show us different result of ink transparency and density of actual printing result. There might be a differences from actual printing result not only the amount of transferred ink, but there is also some other point we should check it out. According to the result of this studies, we found that different rubber compounds and their surface roughness directly effect to the rate of ink transfer. It also shows that the amount of transferred ink is not even and stable amount what we expect to get optimum printability. To reach a targeted printability with rollers, firstly it is necessary to choose correct rubber compounds with certain purpose and the roughness of roller surface has to be as smooth as less than 5㎛~7㎛.
목차
1. 서론
2. 실험
2-1. 실험 재료
2-2. 실험 방법
2-3. 평가
3. 결과 및 고찰
3-1. 각 롤러 조성에 대한 표면 조도
3-2. 롤러 조성 및 표면 조도에 따른 잉크 전이량
3-3. 실 인쇄 시험 결과
4. 결론
참고문헌