원문정보
초록
영어
We have manufactured Ag pastes for gravure printing by adding different solvent contents. Then the gravure printability and properties of conductive patterns gravure-printed by the different rheology characteristics of pastes were investigated. The dispersity of pastes was increased and the viscosity and shear rate dependence of viscosity for pastes were decreased by increasing the solvent content. Also storage modulus G', loss modulus G" and angular frequency value when G" starts to be bigger than G' of pastes were increased by decreasing the solvent content. These mean a flow drop of paste. As a result of gravure printing using two plates which have different line counts(175line and 350line), conductive patterns printed using 175line were spreaded more but Ag packing, thickness and conductivity of the conductive patterns were better than those printed using 350line. And the spread values of conductive patterns were increased with solvent contents but the best properties for Ag packing, surface roughness and conductivity of the conductive pattern were obtained by paste (3) which has 550cps of viscosity at 100s-1 and tan δ > 1 at 10rad/s. As a result of gravure printing using 350 line plate and paste (3), the conductive pattern has 1.2㎛ of film thickness and 1.9×10-5Ω․㎝ of conductivity
목차
1. 서론
2. 실험
2-1. 실험 재료
2-2. Paste 제조
2-3. 그라비어 제판 & 인쇄조건
2-4. 측정
3. 결과 및 고찰
3-1. Ag paste의 분산 특성
3-2. Ag paste의 레오로지 특성
3-3. 전도성 패턴의 물성
4. 결론
참고문헌