원문정보
초록
영어
Surface sizing is one of the important process to the paper making. Surface sizing had an effect on penetration of oils, physical propertiesm water resistance for the paper. This study was carried out for the purpose of improving printability with surface sizing of domestic newspaper. The samples were prepared by means of TAPPI method(TAPPI 205 om~88), and were wested by IGT printability tester. The results of this study showed that the set-off was reduced on the surface sized with oxidized starch.
목차
Abstract
1. 序論
2. 混合系의 相分離 擧動
2.1 폴리머브랜드의 상용성
2.2 反應에 의한 相分離
2.3 計算에 의한 相分離라인
3. 實驗
3.1 詩料
3.2 경화필름 제작
3.3 測定
4. 結果 및 考察
4.1 혼합계의 상도
4.2 상분리라인의 계산
4.3 경화 속도
5. 結論
參考文獻
1. 序論
2. 混合系의 相分離 擧動
2.1 폴리머브랜드의 상용성
2.2 反應에 의한 相分離
2.3 計算에 의한 相分離라인
3. 實驗
3.1 詩料
3.2 경화필름 제작
3.3 測定
4. 結果 및 考察
4.1 혼합계의 상도
4.2 상분리라인의 계산
4.3 경화 속도
5. 結論
參考文獻
저자정보
참고문헌
자료제공 : 네이버학술정보