원문정보
Effect of MgO Addition Affecting in Zirconia-Frit Composites’ Sintering and Properties of Matter
초록
영어
This study sought to apply different MgO additions to Zirconia (20wt % Frit) and thereby determine its mechanical properties depending upon variation of temperature, as a part of elementary study. First, in terms of sintering density depending on sintering conditions, it was found that sintering density increased as temperature varied from 1100 to 1300 . As the addition of MgO increased, it was found that sintering density tended to decrease at each temperature. For the maximum sintering density obtained from pellet, it was found that 3wt% MgO addition specimens sintered at 1300 had its maximum sintering density as high as 97.39%. This study measured mechanical properties of these specimens, and it was found that their bending strength tended to decrease as the content of MgO addition increased. And it was found that their bending strength reached up to 162 MPa when 3wt% MgO was added to them for sintering process at 1300°ΔC. It was also found that those specimens had Vickers microhardness up to 4.6 GPa when 5wt% MgO was added to them for sintering process at 1300.
목차
I. 서론
II. 연구재료 및 방법
1. 연구재료
2. 연구방법
III. 연구 결과
1. 소결 밀도
2. 기계적 특성
IV. 고찰
V. 결론
참고문헌