원문정보
Optimization of Extraction Process for Mass Production of Paclitaxel from Plant Cell Cultures
초록
영어
Several solvents or combinations of solvents were tested for the extraction of wet or dried biomass at different extraction mode from plant cell cultures. Methanol gave the highest paclitaxel recovery with the least amount of solvent usage. Before extraction, drying of biomass was helpful to decrease solvent usage in extraction step. In this case, drying method was very important to obtain high yield from dried biomass. In the mode of operation, counter-current
extraction process can be able to decrease solvent usage, but paclitaxel recovery was almost same with both batch and counter-current mode of operation. The number of extraction times was at least four to obtain high yield (>99%) from cell and one to obtain high yield (>96%) from cell debris in batch mode. Equilibrium (i.e., the ratio of paclitaxel in biomass to paclitaxel in the extraction solvent) was reached within 5 minutes. The minimum methanol concentration
(90%) and solvent amount (biomass : solvent=1 Kg : 1 L) are enough to obtain high yield (>98%) for extraction from biomass.
한국어
식물세포 배양액으로부터 회수한 식물세포 내 수분 함량에 따른 추출효율은 건조 정도 보다는 건조방법에 상당히 영향을 받음을 알 수 있었으며 건조하여 추출할 경우 사용되는 추출용매를 절약할 수 있었다. 여러가지 유기용매를 이용하여 paclitaxel의 추출 경향을 조사한 결과 메탄올의 경우 가장 적은 양으로 가장 높은 paclitaxel 회수율을 얻어 가장 효과적임을 알 수 있었다. 추출방법의 경우 counter-current 형태를 사용할 경우 batch형태에 비하여 용매 사용량을 줄일 수 있으며 paclitaxel 회수율은 거의 차이가 없음을 알 수 있었다. Batch 형태를 이용한 메탄올 추출시 식물세포의 경우 4회 (회수율>99%), 식물세포조각의 경우 1회 (회수율>96%)의 추출로 대부분의 paclitaxel 회수가 가능 하였다. 또한 메탄올 추출시 90% 이상의 메탄올 농도이면 충분하며 (회수율>98%), 추출시biomass와 메탄올
의 혼합비 (Kg biomass: L MeOH)는 1:1, 추출시간은 1회 5분 이상이면 적당 하였다. 메탄올 추출물에 포함된 극성불순물들은 다음 공정인 액/액 (methylene chloride/ MeOH)추출로 제거하여 정제공정에 사용되어 진다.
목차
서론
실험재료 및 방법
택서스속 식물세포 배양
세포내의 수분함량 측정
Paclitaxel 함량 분석
결과 및 고찰
식물세포 내 수분 함량에 따른 영향
메탄올 추출 공정의 최적화
요약
REFERENCES