초록 열기/닫기 버튼

본 연구는 훼손 유물의 복원 재료로 가장 많이 사 용되고 있는 재료인 에폭시 수지의 성형 어려움과 황 변현상 등의 문제점 발생으로 대체 재료의 연구가 필 요해 시작되었다. 본 연구의 목적은 Bisphenol-A계 합성수지를 기반으로 제조된 에폭시 퍼티에 5종의 충 전제를 혼합하여 수지의 물성변화를 확인해보고, 복원 재료로서의 적용 가능성을 제시해 보고자 하는 것이 다. 따라서 본 논문은 기존 재료와의 물성 비교를 위 해 접착력, 마모율, 인장강도, 수축율, 경도, 압축강도, 황변도 등의 실험을 시도하였다. 연구 결과 및 내용은 다음과 같다. 첫째, 마모율은 M-E가 기존 재료에 비해 약 2.3 ~ 15배 향상되었으 며 둘째, 수축 및 변형도 일어나지 않아 유물에 대한 안전성도 확보하였다. 셋째, 황변 현상은 약 0.5 ~ 2 배 향상되어 유물과의 이질감 및 재처리로 발생되는 유물의 피로도가 일부 개선될 수 있을 것으로 판단된 다. 그러나 각각의 충전제에 따라 재료의 장․단점이 다르게 나타나는 것을 확인할 수 있었다. 이러한 연구 결과를 바탕으로 향후 각각의 충전제 를 혼합한 재료의 물성실험도 지속적으로 이루어지고 유물의 재질 및 특성에 맞는 충전제를 찾아야 할 것 으로 판단되며, 본 연구를 통해 훼손 유물의 재질, 특 성, 손상 정도에 맞는 복원 재료가 개발될 수 있기를 기대한다.


This study started from the need for research on alternative materials because of problems such as the difficulty of the making of Epoxy resins -most often used as materials to restore damaged artefacts - and yellowing. The purpose of this study was to check the change of properties by mixing five kinds of fillers to Epoxy putty made based on Bisphenol-A typed synthetic resins and to suggest their potential as restoration materials. So, in order to compare their properties with the existing materials, this treatise attempted the experiments such as adhesion, wear rate, tensile strength, contraction rate, hardness, compression strength, the extent of yellowing, compression strength, the extent of yellowing. The findings were as follows. First, in wear rate, M-E improved roughly by 2.3 - 15 times compared with the existing materials. Secondly, there occurred neither contraction nor transformation, consequently securing stability for artefacts. Thirdly, yellowing improved roughly by 0.5 - 2 times, presumably contributing to some improvement in the sense of foreignness to the artefacts and fatigue degrees of artefacts occurring from reprocessing. However, the study found that advantages and disadvantages of materials were shown differently depending on each filler. Based on these findings, the study believes property tests for materials mixing each filler should be carried on steadily in the future and fillers should be developed matching material quality and characteristics of artefacts. And the study hopes these findings may contribute to the development of restoration materials suiting material quality, characteristics and the extent of damage.