초록 열기/닫기 버튼

치과 보철물을 수복할 때 자연치 에나멜과 저작(대합)되는 보철물의 마모(wear)도는 중요하다. 구강의 저작기능 향상에 연결되기 때문에 지르코니아 보철물과 자연치 에나멜은 비슷한 마모를 가져야 한다. 본 연구는 자연치와 대합되는 폴리싱 된(polished) 지르코니아, 글레이징 처리된(glazed) 지르코니아, 그리고 glass bead 처리된 지르코니아의 roughness와 마모량을 측정하고, 대합되는 자연치 에나멜의 마모를임상적으로 평가해 보는 것을 목적으로 한다. 지르코니아 시편은 각 그룹별로 glass Bead, glazing, polishing 표면처리 하였다. 각 시편의 연마 후에는표면 거칠기를 측정하였다. 대합치 시편은 발치된 구치 교두를 사용하였다. 2체 마모운동은 120,000 주기동안 1kg 하중과 5mm 스트로크, 1Hz의 주파수를 적용하였다. 실험 결과 glazing군에서 가장 높은 대합치마모량(0.1615±0.0622mm3)을 보였고, polishing군에서가장 낮은 대합치 마모량(0.0154±0.0103mm3)을 보였다. 지르코니아 보철을 수복할 경우 저작기능 향상을위해서는 지르코니아 보철 표면을 폴리싱 한 후 글래이징(glazing)을 하는 것이 대합되는 자연치 에나멜의 마모를 줄일 수 있다


In case of dental prosthesis recovery, the wear of a dental prosthesis for occlusion with enamel of natural tooth is important. It is related to an improvement in oral masticatory function, so that a zirconia prosthesis and enamel of a natural tooth should have similar wear. The purpose of this study is to measure the surface roughness and wear of polished zirconia, glazed zirconia, and glass-beat treated zirconia for mastication with enamel of a natural tooth and then to apply the measured values to a clinical setting for evaluation, in order to improve oral masticatory function which masticate. Glass Bead, glazing, and polishing was used as surface treatment for zirconia specimen according to each group. Surface roughness was measured after the surface treatment of each specimen. The cusp of extracted premolar was used for antagonistic teeth specimen. With regard to 2-body wear motion, during 120,000 cycles, 1kg of load, 5mm of stroke and 1Hz of frequency was applied. In the results of experiment, the largest amount of wear (0.1615±0.0622mm3) in antagonistic teeth (human enamel) was shown in the glazing group. And the smallest amount of wear (0.0154±0.0103mm3) in antagonistic teeth was shown in the polishing group. In case of zirconia prosthesis recovery, in order to improve oral masticatory function, it is required to polish and then glaze the surface of a zirconia prosthesis to reduce the wear of enamel of a natural tooth in mastication.