원문정보
Flexural Behavior of Structural Rectangular Hollow Section Beam using SPSR400 by Support Condition of Both Ends
초록
영어
In this study, a behavior of beam with rectangular hollow section (RHS) was investigated through three-point bending test, which was to evaluate the peak load and the catenary action of beam having the moment restraint at both ends. The moment restraint is provided by three angles and three anchor bolts (one in bottom flange and two in web sides) at beam end. The beam span was 3,600mm and the concrete wall for supporting a beam was designed with relatively rigid stiffness to the horizontal direction so as to generate the catenary action of beam. Test results showed that the tensile force of anchor due to catenary action increased the load-carrying capacity by approximately 55%, which is called as the second peak load. This second peak load happens when the anchor at a support fully resists a tensile force.
한국어
본 연구에서는 보의 양 단부 모멘트 구속에 의한 최대하중과 현수작용을 알아보기 위해 휨 실험을 통하여 양 단부 지지조건에 따른 각형강관 보의 거동을 분석하였다. 모멘트 구속은 보의 양 단부에 3개의 앵글과 앵커를 이용(하부 플랜지에 1개, 양쪽 웨브에 2개)하여 실현하였다. 보 경간은 3,600 mm이며 콘크리트 벽체는 지지부가 수평방향으로 상대적으로 큰 강성을 발휘하여 현수거동이 발생하게 설계하였다. 실험 결과 현수작용에 의한 앵커의 인장력에 의해 최대하중은 약 55% 증가하며 이를 2차 최대하중이라 한다. 이때의 하중을 2차 최대하중이라 하며 2차 최대하중은 지점부 앵커가 인장력에 충분히 저항할 경우에만 발생한다.
목차
1. 서론
2. 실험
2.1 실험체 계획
2.2 각형강관의 재료인장시험
2.3 콘크리트공시체 압축시험
2.4 앵커볼트의 인발 및 전단시험
3. 이론적 검토
3.1 각형강관의 단면검토
3.2 보 부재의 내력 및 처짐 검토
3.3 앵커볼트의 전단력 검토
3.4 붕괴시점의 부재력 검토
4. 실험결과 및 분석
4.1 실험결과
4.2 현수작용의 분석
5. 결론
참고문헌